Assembly

Download assembly instructions

Assembly Duo / Triple

Place the Flip Clip Triple/Duo at a height of approx. 170 cm using a spirit level. When determining the mounting height, use the equipment you are suspending as a guide.

Transfer the two top drill holes to the wall.

Remove the Flip Clip Duo/Triple from the wall and drill a hole with a diameter of 8 mm at each of the marked locations. Then insert the supplied dowels and countersink them flush with a hammer.

The dowels included in the delivery are compatible with the following types of walls:

  • Plasterboard (min. 25 mm thickness)
  • Gypsum fiberboard
  • Brick
  • Concrete

For mounting on wooden walls is not necessary to use dowels

Now screw in the included screws with the help of a cordless screwdriver and a TX20 Torx bit to a distance of 5mm from the wall.

Now the Flip Clip Triple/Duo can be hooked into the screws.

For the Flip Clip Triple, the two holes at the bottom must now be marked and drilled as in steps 1 and 2.

Finally, fix all screws with a cordless screwdriver.

Make sure that the screws are not overtightened when screwing them in and thus do not find a hold!

If this is the case, we recommend moving the Triple/Duo and repeating the previous steps.

Assembly Regular / Flex

Place the Flip Clip Triple/Duo at a height of approx. 170 cm using a spirit level. When determining the mounting height, use the equipment you are suspending as a guide.

Transfer the two top drill holes to the wall.

Remove the Flip Clip Duo/Triple from the wall and drill a hole with a diameter of 8 mm at each of the marked locations. Then insert the supplied dowels and countersink them flush with a hammer.

The dowels included in the delivery are compatible with the following types of walls:

  • Plasterboard (min. 25 mm thickness)
  • Gypsum fiberboard
  • Brick
  • Concrete

For mounting on wooden walls is not necessary to use dowels

Now screw in the included screws with the help of a cordless screwdriver and a TX20 Torx bit to a distance of 5mm from the wall.

Now the Flip Clip Triple/Duo can be hooked into the screws.

For the Flip Clip Triple, the two holes at the bottom must now be marked and drilled as in steps 1 and 2.

Finally, fix all screws with a cordless screwdriver.

Make sure that the screws are not overtightened when screwing them in and thus do not find a hold!

If this is the case, we recommend moving the Triple/Duo and repeating the previous steps.

Assembly Duo / Triple

Place the Flip Clip Triple/Duo at a height of approx. 170 cm using a spirit level. When determining the mounting height, use the equipment you are suspending as a guide.

Transfer the two top drill holes to the wall.

Remove the Flip Clip Duo/Triple from the wall and drill a hole with a diameter of 8 mm at each of the marked locations. Then insert the supplied dowels and countersink them flush with a hammer.

The dowels included in the delivery are compatible with the following types of walls:

  • Plasterboard (min. 25 mm thickness)
  • Gypsum fiberboard
  • Brick
  • Concrete

For mounting on wooden walls is not necessary to use dowels

Now screw in the included screws with the help of a cordless screwdriver and a TX20 Torx bit to a distance of 5mm from the wall.

Now the Flip Clip Triple/Duo can be hooked into the screws.

For the Flip Clip Triple, the two holes at the bottom must now be marked and drilled as in steps 1 and 2.

Finally, fix all screws with a cordless screwdriver.

Make sure that the screws are not overtightened when screwing them in and thus do not find a hold!

If this is the case, we recommend moving the Triple/Duo and repeating the previous steps.

Free delivery

From an order value of € 200 we deliver free of charge to Austria and Germany.

10 years warranty

You can get spare parts for our holders even for 30 years old flip clip.

Secure Payment

We use the most secure payment system currently available on the market to process our online payment.